Description

“NTPL” MAKE CONTACT RESISTANCE METER
TYPE: CRMNT-100AU

TECHNICAL FEATURES:
Input Power Supply : 230V ± 10%, 50Hz, 1phase AC.
Resistance Range  /  Resolution  /  Test Current
200μΩ                     /    0.1 μΩ         /      100A
2mΩ                        /       1μΩ            /       50A
20mΩ                    /      0.01mΩ     /       20A

Test Currents         : 100A / 50A / 20A Selectable through drop down menu.
Connection Type   : 4 terminal Measurement
Resistance Range : Automatic Resistance range selection: 200μΩ, 2mΩ, 20mΩ with current setting.
Accuracy                   : 0.5 % of reading, +/- 2 Digit
Testing Mode         : Automatic, Current Injection time 10 Seconds approx.
Display                      : LCD Display
The above Test unit will be single compact, rugged & portable type provided with handle for easy movement.

Selection of Injection Current can be done by keypad.

• System can only be energized when the display indicates “PRESS START TO PROCEED”.
• Resistance will be calculated by the micro-ohm meter automatically and the same will be shown in display.
• Protection: Over Load protection will be provided with LAMP indications.

ENVIRONMENTAL CONDITION:
Equipment will operate 10 to 50 Deg C (Operating); Ambient to 90% RH.

ACCESSORIES:

• Current leads (15 meters) of suitable rating with large crocodile clip at one end – 2nos.
• Potential leads (15 meters) with crocodile clips at one end – 2nos.
• Earthing lead (15 meters) – 1no.
• Power supply cable with 3-pin plug -1no.
• Spare Fuse-1 set
• Carrying Case for Test Leads-1 no.

Approx. Dimension: (LxWxH): 483x500x290
Approx. Weight: 18 kg.

DOCUMENTS:
Operation Manual, Works Test Report, Warrantee Certificate will be supplied along with the set.