Description
“NTPL” MAKE TRANSFORMER WINDING RESISTANCE METER
TYPE: UONT010AU-2CH
TECHNICAL FEATURES:
|
Obs. |
Test Current | Resistance Range | Resolution |
|
1 |
10A | 1999μΩ |
0001μΩ |
|
2 |
10A | 19.99mΩ |
0.01mΩ |
|
3 |
1A | 199.9mΩ |
0.1mΩ |
|
4 |
100mA | 1999mΩ |
1mΩ |
|
5 |
10mA | 19.99Ω |
0.01Ω |
|
6 |
1mA | 199.9Ω |
0.1Ω |
| 7 | 1mA | 1999Ω |
1Ω |
Input : 230V ± 10%, 50Hz, 1 phase AC.
Accuracy :±(1% + 3 digit)
Display : LCD
GENERAL ARRANGEMENT:
- Main Switch for input power along with LED indicator.
- ‘START’ test push button to energise the control circuit.
- ‘MEASURE’ push to initialize the measurement system in taking readings.
- ‘RESET’ to Reset the measured values.
- ‘DISPLAY RESET’ to Reset the display.
- Rotary switch for direct current range selection.
- Four terminal connection arrangements.
- “START ON/OFF” push button.
All the above components will be housed within robust cabinet having proper cooling arrangement.
PROTECTION:
- The Set is provided with thermal cooling arrangement by cooling fans.
- Protection against current lead disconnection while in use.
- Induction Kickback suppression.
- Snap acting overload protection.
ACCESSORIES:
- Current leads of 3 meters length provided with crocodile clip of adequate rating –2 nos.
- Potential leads of 3 meters length provided with crocodile clip –4 nos. (2 nos. each for two winding)
- Shorting lead of 3 meters length provided with crocodile clip at both ends to connect between primary & secondary winding.
- During testing one winding of any sample under test, the other winding should be shorted by this lead-1 no.
- Earthing lead of 3 meters length with crocodile clip at one end –1no.
- Power Supply cable with 3 pin plug suitable for 230V, 50Hz, single phase AC.
Connecting leads more than 3 meters may be provided at extra cost.
DOCUMENTS:
Operation Manual, Works Test Report, Warrantee Certificate will be supplied along with the set.
Reviews
There are no reviews yet.